Wall ties, insulation, DPCs, lintels and reveals built in as the work goes up. The detailing is what keeps a wall dry and performing, so we build it in properly as we course rather than leaving it to chase after, on substructure and superstructure alike.
Wall ties set to the right spacing and cavity insulation built in clean and tight as the skins go up, so the cavity performs and stays dry.
Damp-proof courses, cavity trays and weeps built in at the right levels to throw water out of the cavity instead of into the build.
Lintels set on proper bearing and padstones, openings formed square and reveals built clean ready for windows and doors.
All the detailing built in as we course, to the drawings and cavity spec, so nothing has to be chopped in or patched later.
The cavity, ties, insulation, DPCs and trays are what keep damp out of the inner skin and the rooms beyond. Get the detailing right as you build and the wall stays dry; leave it or rush it and you get cold bridging and damp problems later. We build it in properly as we go.
Yes. The cavity insulation goes in tight against the inner skin as the wall goes up, with the ties holding it back, so there are no gaps and no cold spots. It is far better done as you course than stuffed in after.
Yes. We form the openings square, set the lintels on proper bearing and padstones, and build the reveals clean and plumb, ready for the windows and doors to go in.
We do. Cavity trays go in over openings and at the right levels with weep vents to let any water in the cavity drain back out, all built in as the work goes up.
Yes. Tie spacing, insulation, DPC and tray levels are all built to the engineer’s and the development’s cavity spec, so it passes inspection and performs as designed.
Send over your drawings or a few photos of the plot and we will come back with a free quote.
Call or WhatsApp for a quick chat about your cavity walls & detailing, or drop the details in the form.